Adhesive polyurethane is a two-component adhesive self extinguishing. It allows heterogeneous assembling needing good peeling and ageing resistances .
• Bonding of bodywork.
• Bonding of electronic components.
• Bonding of metallic structures (racing vehicles, aeronautics).
• Bonding of insert and composite structure.
Easy to use cartridge kit, Bonds a Wide Variety of Substrates, Fast-Setting, No shrinkage, Applies up to 1 3/16” thick per layer, Styrene Free
Application: It can be applied in a layer up to 30mm thick at one time to make an excellent filler or repair paste. Used in Woodworking, Bonding Modeling boards like Axson's ProLab 65 and also can be used as a filler.
A130
Application: All purpose general Adhesive
Specs:
Pot-Life (minutes) - 5
Hardness(Shore D) - 80
Density (lb/ft) - 9.6
Elongation percentage - 3
Work Range (F) - -40 to +140 degrees
Cure Time (minutes) - 15
Mix Ratio - N/A
A140
Application: Bonds metal to metal, honeycomb, foam, insert bonding
Specs:
Pot-Life (minutes) - 20
Hardness(Shore D) - 80
Density (lb/ft) - 10.8
Elongation percentage - 7
Work Range (F) - -40 to +140 degrees
Cure Time (minutes) - 4 hours
Mix Ratio - N/A
A210
Application: bonds electrical components, rubber, large body panels
Specs:
Pot-Life (minutes) - 45
Hardness(Shore D) - 90
Density (lb/ft) - 11.4
Elongation percentage - 50
Work Range (F) - -40 to +212 degrees
Cure Time (minutes) - N/A
Mix Ratio - N/A
A251
Application: Bonds metal, thermoplastics, glass, composites, or other materials
Specs:
Pot-Life (minutes) - 7
Hardness(Shore A) - 64
Density (lb/ft) - 10.8
Elongation percentage - 300
Work Range (F) - -40 to +212 degrees
Cure Time (minutes) - 15
Mix Ratio - N/A
A300-NF
Application: Ideal for bonding plastics and dissimilar materials to each other
Specs:
Pot-Life (minutes) - 5
Hardness(Shore D) - 70
Density (lb/ft) - 8.8
Elongation percentage - 40
Work Range (F) - -40 to +248 degrees
Cure Time (minutes) - 15
Mix Ratio - N/A
A310-NA
Application: Ideal for bonding plastics and dissimilar materials to each other
Specs:
Pot-Life (minutes) - 15
Hardness(Shore D) - 75
Density (lb/ft) - 8.8
Elongation percentage - 40
Work Range (F) - -40 to +248 degrees
Cure Time (minutes) - 25
Mix Ratio - N/A
A280
Application: Ideal for bonding plastic, composite or dissimilar materials
Specs:
Pot-Life (minutes) - 7
Hardness(Shore A) - 90
Density (lb/ft) - 11.3
Elongation percentage - 60
Work Range (F) - -40 to +212 degrees
Cure Time (minutes) - N/A
Mix Ratio - N/A
A290
Application: Ideal for bonding that need flexibility or where vibration is present
Specs:
Pot-Life (minutes) - 3
Hardness(Shore A) - 90
Density (lb/ft) - 11.3
Elongation percentage - 60
Work Range (F) - -40 to +212 degrees
Cure Time (minutes) - N/A
Mix Ratio - N/A
